One Coat Door Oil
One Coat Door Oil is a premium wood oil for the protection of Interior Wood surfaces in one single coat.
It is a two component one-layer Hardwax oil. The oil is the result of a unique blend of natural oils and hard waxes without addition of solvents and enhances the natural look and feel of the wood.
Features and Highlights
- 0% VOC's, NO volatile organic compounds, 100% Eco-Friendly
- Suitable for horizontal and vertical wood surfaces
- High coverage per litre 40-50m2 per litre
- Provides colour and protection in One Coat only
- Easy to apply to all wood types
- No overlaps
- Extended pot life - When A+B components have been mixed and the mixture is resealed then your product will not harden like typical 2-mixture component products
- Easy to maintain and renovate
| No. of coats |
1 |
| Coverage |
40-50m2 per litre |
| Drying time |
2 hours touch dry
7 days fully cured
|
| Size |
20ml sample, 100ml + 100ml, 500ml + 100ml, 1L + 200ml |
| MPN |
Please Select Size/Option |
| GTIN |
Please Select Size/Option |
Application
Preparation
Wood surfaces
1. Sand the surface to be treated thoroughly and evenly with120 - 150 grit sand paper (if previously treated, remove all treatments completely).
2. Remove dust with a soft brush i.e., paint brush or air hose.
3. If using a pre-treatment product from the Creative Base or Colour Base range, apply now following application instructions.
PRE-TREATMENT
1. Apply COLOUR BASE of CREATIVE BASE to wood surface, not to MDF or similar surfaces, according to the technical data sheet.
2. Lightly sand if necessary. Clean after sanding
Oil Application
1. Mix A + B Component, add 20% B component to A component i.e., 1L A + 200ml B or 500ml A + 100ml B (Pot life is several days in closed pot after mixing).
Wood Surfaces
2. Apply oil with scrubby pad or cotton cloth or floor/hand polisher with a white pad.
3. After 5 minutes remove excessive oil with cotton cloth. All excess oil must be removed to ensure the product dries
4. Surface will be touch dry after 2-3 hours. Dry in 24 hours.
Important information: Used rags and pads with oil can cause spontaneous combustion. When certain oils are exposed to air it combines with oxygen molecules, the reaction creates heat which can cause the cloth to ignite. Used pads and rags should therefore be immersed in water after use.
Aftercare
Cleaning
- 7 days after application, the treated surface can be cleaned with water and KOATE Soap.
Maintenance
- 2. Surfaces can be maintained with KOATE Maintenance products.
Datasheets
| Name |
Who is this for |
Download |
| One Coat Door Oil - Wood Surface |
DIY Market, Tradesman, Architect, QS, Interior Designer, Specifier
|
 Download |
|
One Coat Door Oil - Valchromat Surface
|
Tradesman, Architect, QS, Interior Designer, Specifier
|
Download
|
Videos
Gallery
Samples
One Coat Wood Oil
One Coat Wood Oil is a two component, with extended pot life when mixed, one-layer oil that can be used for the protection of interior wood surfaces. The oil is the result of a unique blend of natural oils and hard waxes without addition of solvents and enhances the natural look and feel of the wood. Get your sample here.
