One Coat Wood Oil 20ml Sample - 22 Colours to choose from

One Coat Wood Oil

One Coat Wood Oil is a premium wood oil for the protection of Interior Wood surfaces in one single coat.

It is a two component one-layer Hardwax oil.  The oil is the result of a unique blend of natural oils and hard waxes without addition of solvents and enhances the natural look and feel of the wood. 

Features and Highlights

Application

Preparation 

Wood surfaces

1. Sand the surface to be treated thoroughly and evenly with120 - 150 grit sand paper (if previously treated, remove all treatments completely). 

2. Remove dust with a soft brush i.e., paint brush or air hose. 

3. If using a pre-treatment product from the Creative Base or Colour Base range, apply now following application instructions. 

PRE-TREATMENT – If using 

1. Apply COLOUR BASE of CREATIVE BASE to wood surface, not to MDF or similar surfaces, according to the technical data sheet.  

2. Lightly sand if necessary. Clean after sanding

Oil Application 

1. Mix A + B Component, add 20% B component to A component i.e., 1L A + 200ml B or 500ml A + 100ml B (Pot life is several days in closed pot after mixing).  

Wood surfaces – 

2. Apply oil with scrubby pad or cotton cloth or floor/hand polisher with a white pad.  

3. After 5 minutes remove excessive oil with cotton cloth.  All excess oil must be removed to ensure the product dries 

4. Surface will be touch dry after 2-3 hours. Dry in 24 hours.

Important information: Used rags and pads with oil can cause spontaneous combustion.  When certain oils are exposed to air it combines with oxygen molecules, the reaction creates heat which can cause the cloth to ignite. Used pads and rags should therefore be immersed in water after use.

Aftercare

Cleaning

1. 7 days after application, the treated surface can be cleaned with water and KOATE Soap. 

Maintenance

1. 2.  Surfaces can be maintained with KOATE Maintenance products. 

Datasheets

Name	Who is this for	Download
One Coat Door Oil - Wood Surface	DIY Market, Tradesman, Architect, QS, Interior Designer, Specifier	Download
One Coat Door Oil - Valchromat Surface	Tradesman, Architect, QS, Interior Designer, Specifier	Download

Videos 

Gallery

Samples

One Coat Wood Oil

One Coat Wood Oil is a two component, with extended pot life when mixed, one-layer oil that can be used for the protection of interior wood surfaces. The oil is the result of a unique blend of natural oils and hard waxes without addition of solvents and enhances the natural look and feel of the wood.