One Coat Worktop Oil is a premium eco-friendly wood oil for the protection of all Worktops in one single coat. Extremely durable coating.
Itis a two-component, one-layer Hardwax oil. The oil is the result of a unique blend of natural oils and hard waxes without the addition of solvents and enhances the natural look and feel of wooden surfaces.
Features and Highlights
0% VOC's, NO volatile organic compounds, 100% Eco-Friendly
Suitable for horizontal and vertical wood surfaces
High coverage per litre 40-50m2 per litre
Provides colour and protection in One Coat only
Easy to apply to all wood types
No overlaps
Extended pot life - When Component A+B have been mixed and the mixture is resealed then your product will not harden like typical 2-component products. The produce will be reusable for days if not weeks after initial mixing
Easy to maintain and renovate
No. of coats
1
Coverage
20-25m2 per 500ml
4-5m2 per 100ml
Drying time
2 hours touch dry
24 hours dry
7 days fully cured
Size
20ml sample, 100ml, 500ml
MPN
Please Select Size/Option
GTIN
Please Select Size/Option
Application
Preparation
Wood surfaces
1. Sand the surface to be treated thoroughly and evenly with 120 - 150 grit sandpaper (if previously treated, remove all treatments completely).
2. Remove dust with a soft brush i.e., paintbrush
Oil Application
1.Mix A + B Component, add 20% B component to A component i.e., 500ml A + 100ml B or 100ml A + 20ml B, 30% B-component recommended for commercial, high-use areas. (Pot life isseveral days in a closed pot after mixing).
Wood surfaces –
2. Apply oil with scrubby pad or cotton cloth.
3. After 5 minutes remove excessive oil with cotton cloth. All excess oil must be removed to ensure the product dries
4. Surface will be touch dry after 2-3 hours. Dry in 24 hours.
5. Fully cured in 5 days. Do not wash or wipe the surface with a wet cloth during the curing period. Use prep boards or protective coverings on the surface until the 5 day curing process has taken place.
Important information: Used rags and pads with oil can cause spontaneous combustion. When certain oils are exposed to air it combines with oxygen molecules, the reaction creates heat which can cause the cloth to ignite. Used pads and rags should therefore be immersed in water after use.
Aftercare
Cleaning
5 days after application, treated wooden worktops can be cleaned with water and KOATE Wood Soap
Maintenance
Surfaces can be maintained with KOATEMaintenance products. If correct aftercare takes place you should not require maintenance for several months.
One Coat Wood Oil is two-component, with extended pot life when mixed, one-layer oil that can be used for the protection of interior wooden worktops. The oil is the result of a unique blend of natural oils and hard waxes without the addition of solvents and enhances the natural look and feel of the wood. Get your sample here.
